Dolmar PB-7600.4 User Manual (English)

Other manuals for Dolmar PB-7600.4

Questions and Answers:

M
Maria ColeAug 1, 2025
How to start a Dolmar PB-7600.4 Blower when the engine won't start?
- A
  Angela AveryAug 1, 2025
  If your Dolmar Blower's engine won't start, there are several potential causes and solutions: * Ensure you've primed the pump by pushing it 7 to 10 times. * Pull the starter rope strongly. * Check and feed fuel if it's lacking, clean a clogged fuel filter, or straighten a broken fuel tube. * If the fuel is deteriorated, replace it (recommended every month). * For excessive fuel suction, set the throttle lever to high speed and pull the starter handle. If it still fails, dry the spark plug electrode before reassembling. * Also, ensure the plug cap is securely attached, clean a contaminated spark plug, or adjust/replace the spark plug if there's an abnormality. * For abnormal carburetor, starter rope, or drive system it is recommended to request for inspection and maintenance.
B
Bill BrownAug 5, 2025
What to do if my Dolmar Blower engine stops soon after starting?
- D
  David HernandezAug 5, 2025
  If your Dolmar Blower engine stops soon after starting, consider these possible causes: * Ensure you perform a sufficient warm-up operation. * Check that the choke lever is set to “OPEN” after the engine has warmed up. * Clean a clogged fuel filter or a contaminated air cleaner. * Also, make sure the throttle wire is securely attached. * For abnormal carburetor or drive system, it is recommended to request for inspection and maintenance.
D
Denise ObrienAug 16, 2025
Why does my Dolmar Blower engine stop soon after starting, and the engine speed doesn't increase?
- W
  welchdanielleAug 16, 2025
  Your Dolmar Blower might be stopping soon after starting, or the engine speed may not increase due to several reasons. First, ensure the engine has been sufficiently warmed up. If the engine is warm, check that the choke lever is set to “OPEN”. A clogged fuel filter or a contaminated air cleaner could also be the cause; in that case, clean them. Also, make sure the throttle wire is securely attached. If these steps don't resolve the issue, the carburetor or drive system may be abnormal, requiring professional inspection and maintenance.
L
leachjasonAug 20, 2025
Why does my Dolmar Blower engine not stop when I set the choke lever to CLOSE?
- V
  Victoria ChaneyAug 20, 2025
  If your Dolmar Blower's engine continues to run even when you set the choke lever to CLOSE, check if the connector is detached and attach it securely. For abnormal electric system, it is recommended to request for inspection and maintenance.
C
Colton MorenoAug 26, 2025
What to do if the Dolmar PB-7600.4 engine does not stop?
- K
  Kevin ClarkAug 26, 2025
  If your Dolmar Blower engine won't stop, check if the connector is detached and attach it securely. If the issue persists, there may be an abnormality in the electric system, requiring professional inspection and maintenance.

Dolmar PB-7600.4 Specifications

General

Engine Type	2-stroke
Displacement	75.6 cc
Air Volume	1, 200 m³/h
Weight	24.2 lbs
Fuel Tank Capacity	67.6 oz
Maximum Air Speed	200 mph
Maximum air volume	1, 200 m³/h

Related product manuals

Dolmar PB-7600.4 Spare Parts List

Table of Contents

Other manuals for Dolmar PB-7600.4

Questions and Answers:

Dolmar PB-7600.4 Specifications

Related product manuals