Dolmar PM462R - Page 14

14
4. TECHNICAL DATA
5. ASSEMBLY
5-1 ASSEMBLING THE FOLDING
HANDLE
1. Fix the lower handlebar onto the handle bracket with
bolt, washer and locking knob. (Fig. 5)
2. Lift the two locking levers to connect the upper and
lower handle. (Fig. 6)
3. Push the locking lever closed to lock the handlebars in
the operating position. (Fig. 7)
4. Adjust the tension by turning the lock nut with a
suitable spanner. (Fig. 8)
5. Position the cable over the handle shaft. Clamp it
around the middle of lower handle by the cable clamp
and make sure the cable is fixed around the outside of
the handle. (Fig. 9, Fig. 10) Otherwise the cable may
be pinched by opening/closing the rear cover.
5-2 ADJUSTMENT FOR AN
APPROPRIATE ANGLE
1) Pull the locking lever opening.
2) Rotating the upper handle centered of the angle
adjusting gear for adjusting an appropriate angle into
the scope -15º to 15º (3 position: -15º/0º/15º) as the
Fig. 11 shown.
3) Push the locking lever closed to connect the lower
handle and the upper handle.
5-3 MOUNTING AND DISMOUNTING THE
GRASS CATCHER
1. To fit: Raise the rear cover and hitch the grass catcher
on rear of mower. (Fig. 12, Fig. 13, Fig. 14)
2. To remove: Grasp and lift rear cover, remove grass
catcher.
5-4 STARTER HANDLE
Move the starter handle from the engine to the rope guide.
(Fig. 15)
5-5 HEIGHT OF CUT
Apply outward pressure to disengage lever from rack.
Move lever forward or back to adjust height. (Fig. 16 and
see clause 7-9)
6. FUNCTION
These lawn mowers can be retrofitted from its normal
function, based on the application purpose:
From lawn mower with rear collection to:
1. Mulching mower or as
2. Side-discharge mower.
What is mulching?
When mulching, the grass is cut in one working step, then
finely chopped and returned to the grass strip as natural
fertilizer.
Model PM462R PM4602SR PM-4602 S3C PM-5102 S3C
Engine type
B&S 675EXi Series,
ReadyStart
B&S 675EXi Series,
ReadyStart
B&S 750EX Series,
ReadyStart
B&S 750EX Series,
ReadyStart
Self-propelled No Yes Yes Yes
Engine displacement 163 cm
3
163 cm
3
161 cm
3
161 cm
3
Nominal Power 2.6 kW 2.6 kW 2.5 kW 2.5 kW
Blade width 460 mm 460 mm 460 mm 510 mm
Rated speed 2,800/min 2,800/min 2,800/min 2,800/min
Fuel tank capacity 1.0 L 1.0 L 1.0 L 1.0 L
Oil tank capacity 0.47 L 0.47 L 0.6 L 0.6 L
Grass catcher capacity 60 L 60 L 60 L 65 L
Net weight 30 kg 32.5 kg 35 kg 38 kg
Height adjustment
25-70 mm,
8 adjustment
25-70 mm,
8 adjustment
25-70 mm,
8 adjustment
25-70 mm,
8 adjustment
Model PM462R PM4602SR PM-4602 S3C PM-5102 S3C
Guaranteed Sound Pressure
level at operator’s position
(According to EN ISO 5395-1
Annex F & EN ISO 5395-2, EN
ISO 4871)
84.3 dB (A)
(K=3 dB (A))
84.3 dB (A)
(K=3 dB (A))
83.9 dB (A)
(K=3 dB (A))
85.7 dB (A)
(K=3 dB (A))
Measured Sound Power level
94.0 dB (A)
K=1.80 dB (A)
94.0 dB (A)
K=1.80 dB (A)
94.3 dB (A)
K=1.80 dB (A)
95.9 dB (A)
K=2.16 dB (A)
Guaranteed Sound Power level
(According to 2000/14/EC)
96 dB (A) 96 dB (A) 96 dB (A) 98 dB (A)
Vibration
(According to EN ISO 5395-1
Annex G & EN ISO 5395-2)
5.18 m/s
2
K=1.5 m/s
2
5.18 m/s
2
K=1.5 m/s
2
7.12 m/s
2
K=1.5 m/s
2
6.53 m/s
2
K=1.5 m/s
2