Page 5
12v 30A 12v 40A 24v 20A
299770 299703 299710
Manual Equalization Activated by the button on the front of the panel - 2 hrs
Temperature compensation +/-15mV/°C +/-30mV/°C
Voltage share +/-2%
Ripple <1%
Max. current 30A (+/-5%) 40A (+/-5%) 20A (+/-5%
Fuse 2 x F20A 2xF30A F30A
Protection Against output overload, output short circuit, excessive internal temperature,
excessive battery temperature (optional), faulty external sensor (optional), faulty
overvoltage output, generally faulty fuse.
LED display 6 LEDs
Remote display "Octopus" control panel
Topology Forward 50Hz & built in PFC
Control Microprocessor based RISCC technology
Operating temperature 0°C - 50°C
Storage temperature -20°C - 70°C
Humidity 10%-90% (without condensation)
EMC EN50081-1&EN50082-1
Safety EN60335-1
Ventilation Forced fan cooling
Casing White aluminum with powder coating treatment with plastic side panels
Mounting Wall mounted - 4 screws M4
Dimensions 270mm x 290mm x 120mm HxWxD
Weight 4kg
AC Connections 2 x 4.0mm² terminal blocks & earth
Battery Connections M6 Bolts
Temperature sensors 2 x 1mm² terminal points
Important
• It is very important to note that the inappropriate use of the battery's charging cycle technology can seriously
degrade or even damage it.
• This is particularly true for cycles where the charge outputs are vastly superior to those recommended by the
manufacturer.
• Serious risk of battery overheating and discharge of noxious gasses.
• Please refer to the manufacturer's recommendations for your choice of cycle
• Regarding the choice of position 09- "Sulphation recovery programme", it is recommended to begin the cycle in
the presence of a technician who can, if necessary, stop the programme quickly. Serious risk of battery
overheating and discharge of noxious gasses.
To Next Page
Loading...