Need help?Do you have a question about the Dolphin DX 5 and is the answer not in the manual?
General| Brand | Dolphin |
|---|---|
| Model | DX 5 |
| Category | Vacuum Cleaner |
| Language | English |
Position the caddy and power supply minimum 10ft from pool edge. Keep power supply in shade.
Check voltage, use GFI/ELI, use original power supply. Warning: Do not enter pool during operation.
Instructions for assembling the caddy, connecting wheel assembly, locking plates, pipes, and handle.
How to lock the Dolphin handle diagonally for optimum cleaning. Explains latch and round slot positions.
How to insert batteries into the RCU. RCU is splash-proof and has digital screen, soft touch buttons, joystick.
Uncoil cable, connect to power supply, place DOLPHIN in pool, let it sink. Warning: Do not operate out of water.
Manoeuvre DOLPHIN with joystick, switches to Automatic mode after 30 sec. RCU used for parameters.
DOLPHIN calculates its own path. Parameters can be adjusted via RCU.
Explains RCU menus, cleaning programs (REGULAR, ULTRAclean, WATERline, LAPpool), and parameters.
Steps to replace batteries in the RCU. Remove batteries if not used for 6 months.
Flow chart for navigating RCU menus and settings for cleaning modes and parameters.
Steps to safely remove the DOLPHIN from the pool after shutdown. Warning: Never pull by cable.
Cleaning debris from tracks, wheels, and impeller. Warning: disconnect mains before removing impeller tube.
Tips on cleaning filter bag, pool maintenance, storing DOLPHIN, and handling initial operation issues.
Technical specs for ground speed, scanning rate, suction rate, weight, and power supply.
To Next Page
