Dolphin M400 User Manual

2
Dolphin M400 / M500 | User Instructions
Dolphin M400 / M500
User Instruction
1. INTRODUCTION
Thank you for purchasing a Maytronics Robotic Pool Cleaner.
We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and
cost effective pool cleaning. Its reliable filtration in all pool conditions, active brushing, and all-surface
climbing brush enhance maximum pool hygiene.
The Robotic Pool Cleaners by Maytronics deliver advanced cleaning technology, long lasting
performance and easy maintenance. You and your family will be free to enjoy swimming with full
confidence that your pool is completely clean.
2. SPECIFICATIONS
Motor protection: IP 68
Minimum depth: 0.80m/2.6ft
Maximum depth: 5m/16.4ft
3. WARNINGS AND CAUTIONS
3.1 Warnings
• Use the originally supplied power supply only
• Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
leakage interrupter (ELI)
• Keep the power supply out of standing water
• Position the power supply at least 3.5m/12ft away from the edge of the pool
• Do not enter the pool while the Pool Cleaner is working
• Unplug the power supply before servicing
3.2 Cautions
When not in use store the Pool Cleaner on its Caddy in a shaded area.
Use the Pool Cleaner in the following water conditions only:
Chlorine Max 4 ppm
pH 7.0 - 7.8
Temperature 6-34°C / 43-93°F
NaCl Maximum = 5000 ppm
CAUTION
Digital switch-mode power supply
• Input - 100-250 AC VOLTS
• 50-60 Hertz
• 180 Watt
• Output - <30 VDC
• IP 54

Dolphin M400 Specifications

General

Warranty	2 years
Type	Robotic
Pool Type	In-ground
Cable Length	18 m
Weight	7.5 kg
Pool Size	Up to 12m
Filtration	Fine
Brushing	Active Brushing

Summary

Introduction to Dolphin Pool Cleaners

Dolphin M400/M500 Specifications

Safety Warnings and Usage Cautions

Electrical and Pool Safety Warnings

Important safety instructions regarding electrical connections and pool entry while the cleaner operates.

Water Condition Limitations

Specifies the recommended water parameters (chlorine, pH, temperature, NaCl) for optimal cleaner performance.

Dolphin Pool Cleaner Components

Brushes and Filtration Systems

Details on different brush types and filtration cartridges/filters for the Dolphin cleaner.

Power Supply and Caddy Options

Information on basic and advanced power supply units and the cleaner's storage caddy.

Using the Dolphin Pool Cleaner

Initial Setup Procedures

Steps to prepare the pool cleaner, including cable management and brush protection removal.

Adjusting the Handle Angle

Guide on how to adjust the robot's handle for optimal cleaning results and speed.