What to do if my Dolphin X 40 PLUS Vacuum Cleaner moves but does not clean the pool?
If your Dolphin Pool Cleaner moves but doesn't seem to be cleaning the pool effectively, the filter basket may be clogged and needs cleaning. Additionally, check for any debris stuck in the impeller housing or cover, and remove it.
How to fix a Dolphin X 40 PLUS that doesn’t climb the walls?
If your Dolphin Vacuum Cleaner isn’t climbing the walls, it could be due to a clogged filter basket, which needs cleaning. Another cause might be algae on the walls due to improper chemical levels in the water; adjust the levels and scrub the walls. An unsuitable pH level can also cause this issue, so you should check and adjust the water's chemical levels. Finally, check for any debris stuck in the impeller-house or impeller-cover and remove it.
Why does my Dolphin X 40 PLUS Vacuum Cleaner only clean part of the pool?
If your Dolphin Vacuum Cleaner only cleans part of the pool, ensure the power supply is positioned so the cleaner can freely reach all areas. Check that enough floating cable is released for the cleaner to operate correctly, allowing it to reach all parts of the pool. Also, the filter basket may need cleaning.
How to troubleshoot a Dolphin X 40 PLUS Vacuum Cleaner power supply that is not working?
If the power supply or its switch LED on your Dolphin Vacuum Cleaner are not working, first, verify that there is voltage in the power socket. Next, ensure the power supply is switched ON and plugged in correctly. Check that the power cable is securely connected to the power supply inlet. As an additional step, turn the power supply off, wait 30 seconds, and then turn it back on.
Why is my Dolphin Vacuum Cleaner moving in circles?
If your Dolphin Vacuum Cleaner is moving in circles, there might be a few reasons. Start by cleaning the filter basket. Also, check for any debris stuck in the impeller-house or impeller-cover and remove it. Ensure that the power supply is positioned correctly so the cleaner can reach all areas of the pool. Finally, check if algae or pool water is out of specification and correct the conditions.
What to do if my Dolphin X 40 PLUS does not turn or moves in one direction only?
If your Dolphin Pool Cleaner does not turn or moves in one direction only, check for any debris stuck in the impeller-house or impeller-cover and remove it.
What to do if my Dolphin X 40 PLUS does not move?
If your Dolphin Pool Cleaner does not move, ensure the floating cable is securely connected to the power supply. Also, check for any obstructions blocking the impeller, tracks, or wheels. To do this, unplug the power supply, open the impeller cover, and check for trapped objects. Verify nothing is blocking the tracks or wheels.
General| Brand | Dolphin |
|---|---|
| Model | X 40 PLUS |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
