Dolphin WAVE 100 - 5.2. Putting the Pool Cleaner into the pool; 5.3. Removing the Pool Cleaner from the pool

Dolphin WAVE 100 Pool Cleaner | Operating Instructions
5
Turn the power supply ON.
ON
5.2. Putting the Pool Cleaner into the pool
5.3. Removing the Pool Cleaner from the pool
CAUTION
Turn OFF and unplug the power supply.
Shake the robot from side to side or turn
it upside down to release trapped air.
Let it sink to the pool floor.
If the foam climbing rings on the brushes are dry soak them in water until soft.
The robot will perform automatic shut-off at the end of the cleaning cycle.
OFF
8151637_Book.indb 5 29/12/2013 9:59 AM