Dolphin Supreme M4 - User Manual

Other manuals for Dolphin Supreme M4

User Instructions10 pages

Questions and Answers

R
Robert LeeJul 26, 2025
Why is my Dolphin Vacuum Cleaner not climbing walls?
- C
  Christopher LeonJul 27, 2025
  If your Dolphin Vacuum Cleaner is not climbing walls, ensure that: * The filter cartridge is clean. * If using the Dolphin at the beginning of the season, use the spring cartridge. * Check if the brushes are suitable for your pool coating and replace them if necessary. * Check if the brushes are worn and replace them if needed. * The impeller area is clean. * When applicable, check that the RCU is set for climbing.
R
Richard StewartAug 1, 2025
What to do if the motor of my Dolphin Vacuum Cleaner is not working?
- A
  Andrew DavidAug 1, 2025
  If the motor of your Dolphin Vacuum Cleaner isn't working, you can try the following: * Check if the impeller is blocked. * Check if the drive system is blocked. * If it's an electrical problem (power supply), check the power source. If the power source is in order, please contact your Dolphin distributor.
T
timothy83Aug 7, 2025
Why is my Dolphin Vacuum Cleaner moving in circles?
- R
  Randy RitterAug 7, 2025
  If your Dolphin Vacuum Cleaner is moving in circles, not reaching all pool areas, or not traveling sideways on walls, you should: * Check for any foreign objects in the moving parts. * Ensure the filter cartridge is clean and well-mounted, and that the filter doors are closed. * Make sure enough cable is laid out to cover the entire pool. * Brush any algae from the floor and walls of the pool before using the Dolphin at the beginning of the season. * Adjust the diagonal angle of the handle.
N
Nicholas NunezAug 14, 2025
How to stop my Dolphin Vacuum Cleaner cable from twisting?
- N
  Natasha WiseAug 14, 2025
  To address cable twisting or coiling issues with your Dolphin Vacuum Cleaner, try the following: * Check the pool for any obstructions. * Change the handle's diagonal position after each use. * Remove any excess cable from the pool. * Ensure the filter cartridge is clean. * Periodically straighten the cable and lay it in the sun.
R
Robert BrownSep 10, 2025
What to do if Dolphin Vacuum Cleaner disengages from wall at water line?
- T
  Tracey FlemingSep 12, 2025
  If your Dolphin Vacuum Cleaner climbs too high and disengages from the wall at the waterline, consult your Dolphin distributor.

Summary

What Youll Find Inside the Box

Description of Main Components

Filters

Describes the two types of filters: Spring filter and Ultra-fine filter, used for different pool conditions.

Brushes

Details the three types of optional brushes: PVC, Combined, and Wonder brushes, suited for various pool surfaces.

Power Supply Unit

Details the specifications of the digital, "Switch-Mode" power supply unit, including input, output, and IP rating.

Dolphin Operation

Preparing the Dolphin Pool Cleaner for Use

Covers assembly of the Caddy kit and adjusting the handle float angle for optimal performance and speed.

Laying Out the Cable

Instructions on unwinding and straightening the cable, including safety precautions for the power supply unit.

Inserting the Dolphin into the Water

Guidance on placing the Dolphin pool cleaner into the water and releasing it for operation.

Turning the Dolphin ON

Step-by-step instructions for connecting the cables and powering on the Dolphin pool cleaner.

Taking the Dolphin out of the Water

Procedures for safely removing the Dolphin from the pool, emphasizing not lifting by the cable.

Routine Maintenance

Extracting and Cleaning Filter Elements

Details the process for removing, cleaning, and reassembling the filter elements.

Reinstalling the Filters

Provides guidance on correctly reinstalling filter elements, noting fitting types and a reset indicator.

Dismantling and Cleaning the Impeller

Instructions for disassembling, cleaning, and reassembling the impeller for maintenance.

Storage Instructions

Guidelines for storing the Dolphin pool cleaner, including environmental precautions like avoiding direct sunlight and heat.

Helpful Hints for Better Scanning

Moving the Floats in Handle Housing Grooves

Explains how to adjust the float positions for optimal pool scanning and turning behavior.

Possible Float Configurations

Illustrates three float configurations and their use in different turning scenarios for efficient scanning.

Troubleshooting Guide

Pool Water Condition Parameters

Lists the recommended pH, temperature, salt, and chlorine levels for optimal Dolphin operation.

Symptom and Solution

Provides a guide to common symptoms like cable twisting or poor movement and their corresponding solutions.

Dolphin Supreme M4 Specifications

General

Cycle Time	2 hours
Weight	10 kg
Pool Type	In-ground
Warranty	2 years
Cable Length	18 meters
Cleaning Coverage	Floor, walls, and waterline
Brush Type	Dual brushes
Pool Size	Up to 12m
Navigation	CleverClean Technology
Type	Robotic pool cleaner
Filtration	Fine and Ultra-Fine filtration