Auto Reconnect
The speaker will be shut down automatically 5 minutes later once the
speaker is out of range(33 ft)
There are 3 levels of battery power
Voice Prompt Battery High Battery Medium Battery Low
LED lndicator
Blinking Blinking Blinking
Blue Violet Red
3 times 3 times 3 times
Easy Pairing (First Time Pairing)
1.
Before using the speaker for the first time, you must pair it with a bluetooth-
enabled device(Cellphone,Pad,Laptop.eg).
2.
Turn on the bluetooth function on the device.
3.
Push the Power button to the ON position on the BBH-929s,Then the speaker
enters Pairing Mode, the LED indicator will blink with the red and blue light,you
will also hear a voice prompting 'Power on'.
4.
Search bluetooth device and Select BBH-929s from the list of devices and
pair it with your device.Enter 0000(4 Zeros) if needed.
5.
Once the pairing has been completed successfully, you will hear the voice
prompting connected. The BBH-929s Speaker will automatically turn off if not
finish pairing within 3 minutes.
6.
Pairing Failed:Please turn off your speaker and repeat the steps above.
7.
Automatic Connect: It will connect to the last connected device automatically
when it turns on
Advanced Multipoint
The BBH-929s is capable of having two devices connected to the speaker
at the same time, This will give you the freedom of using call waiting
between calls on both of your connected phones.
Connect Steps:
1.Connect with device 'A',then disconnect it.
2.Connect with device 'B',
3.Connect with device 'A' again.
Then you will have them connected at the same time.
Calling Function
Last Number Redial:Double Click the call button,then your cellphone
will redial the last number you dialed.
The BBH-929s Speaker will connect to the last connected device
automatically when it turns on.
Out range
If the paired devices are separated by a range of 10 meters(33 feet) or
more the speaker and bluetooth device will disconnect.It will automatically
reconnect
when the BBH-929s gets back in range(33 ft)
4 5
Pairing
Battery Status Alert
Automatically Shutdown