Solar Pump Inverter Safety precautions
2
Before installation
Do not operate the inverter if there are any signs of water in the inverter when
unpacking.
Do not operate the inverter if there is any damage or components loss to the inverter
when unpacking. Otherwise, physical injury or damage to the devices may occur.
Do not touch the control terminals, PCB board or components inside the inverter
with hands or body.
Do not operate the inverter if the packing list is not consistent with the devices.
Do not operate the inverter if the information on the name plate is not consistent with
your order.
2. Installation
Only qualified electricians are allowed to perform the installation, otherwise electric
shock may occur.
Please install the inverter on fire-
retardant materials and keep the inverter away
from combustible materials, otherwise a fire may occur.
Please assemble and tighten the mounting screws of the inverter according to the
regulations, otherwise the inverter may fall off.
Do not install the inverter in explosive atmospheres, otherwise an expl
occur.
To Next Page
Loading...
