Domel AZ 108 - User Manual

AZ MOTOR
INSTRUCTIONS FOR BEARINGS REPLACEMENT
Edition 4 (June 2014)

Summary

1. About Instructions for Bearings Replacement

2. About AZ Motors

2.3 Main Motor Parts

3. Safety Instructions and Warnings

General Safety Warnings

Outlines critical safety warnings regarding electric shock, injury, and motor handling.

4. Servicing the Motor for Bearings Replacement

Diagnosing Bearing Noise

Advises on diagnosing bearing noise and initiating replacement.

Step 1: Remove Fan Frame

Instructions for removing the fan frame and motor assembly.

Step 3: Disconnect Motor Cable from Controller

Details on safely disconnecting the motor cable from the controller.

Step 6: Remove Terminal Box and Cable

Steps for removing the terminal box and disconnecting the motor cable.

Step 8: Remove Rear Bearing Fixation Elements

Details on removing components securing the rear bearing.

Step 10: Remove Stator Support and Stator

Instructions for detaching the stator support and stator assembly.

Step 11: Remove Rear Bearing

Guidance on how to remove the rear bearing.

Step 15: Remove Front Bearing

Step 16: Install New Front Bearing

Guidance on installing the new front bearing correctly.

Step 17: Reinstall Rotor and Shaft Assembly

Step 21: Install Stator Support into Housing

Step 23: Install New Rear Bearing

Instructions for installing the new rear bearing.

Step 24: Install Rear Bearing Fixation Elements

Step 28: Install Terminal Box and Cable Connection

Step 29: Connect Motor Cable to Controller

Domel AZ 108 Specifications

General

Brand	Domel
Model	AZ 108
Category	Engine
Language	English