Need help?Do you have a question about the Domel AZ 84 and is the answer not in the manual?
Instructions for detaching the fan frame and motor from the AHU unit.
Instructions for removing rear bearing fixation and preload components.
Steps to detach the stator support and stator from the motor housing.
Procedure for safely removing the rear bearing from its seat.
Procedure for removing the rotor and shaft assembly from the motor flange.
Detailed steps for safely removing the front bearing from the motor shaft.
Instructions for installing a new front bearing, including heating methods.
Guide for lubricating and reinstalling the rotor and shaft assembly into the flange.
Guide for installing the stator support and stator into the motor housing.
Instructions for installing the new rear bearing onto the motor shaft.
Guide for installing rear bearing fixation components and preload elements.
General| Category | Engine |
|---|---|
| Cooling system | Air-cooled |
| Type | Two-stroke, single-cylinder |
| Displacement | 84 cc |
| Lubrication system | Premix (oil-fuel mixture) |
To Next Page
