Dometic 4300 Series - Page 9

9
Dometic 4300/4400 Series Toilets Installation
19 20 21
18. Set the toilet in place on the oor ange (g.
19
) and secure to oor with #14x2-1/2 inch long
lag bolts (g.
20
). Install decorative bolt caps by pushing them onto bolt heads (g.
21
).
19. Turn on electrical power and water to toilet. Lift ush handle and ll toilet bowl with water. Wait
one hour, then inspect the oor around and under the rear of the toilet for leaks or dampness.
If no leaks are present, toilet is ready for operation.
Wiring diagram
22