Technical description CoolFreeze
10
5.1 Operating and display elements
Control panel (fig. 1, page 3, fig. 2, page 3)
Item Description Explanation
1 ON/OFF button Switches the cooling device on or off when the button is
pressed for between one and two seconds
2 POWER Operating display
LED lights up green Compressor is on; set
temperature not yet reached
LED lights up orange Set temperature has been
reached
LED flashes orange Voltage is too low
3 ERROR LED flashes red: Device is switched on but
not ready for operation
4 SET Selects the input mode
•
Setting the temperature
•
Set temperature unit (°Celsius or °Fahrenheit)
•
Set the battery monitor
5 Display Displays the temperature in the refrigerator compartment
The first three digits of the four-digit display show the tem-
perature, the fourth digit indicates the temperature unit
(°C or °F).
When an error occurs, the display shows “Err1” or “Err2”.
6 + Press once to increase the selected value
7 – Press once to decrease the selected value
CF11-16-26-O-16s.book Seite 10 Donnerstag, 5. Oktober 2017 4:13 16
To Next Page
Loading...
