Using the appliance D15, D50
20
Setting the LED interior lighting
The unit has two different modes for lighting:
Standard mode and vitrine mode.
– Standard mode: The interior is illuminated when the door is opened.
– Vitrine mode: The interior is illuminated constantly.
To switch between standard and vitrine modes:
➤ Press the
buttons briefly.
Switching the fan on/off (Dynamic Cooling Mode/Silent Mode)
The fan is switched on (Dynamic Cooling Mode) by default to ensure a homo-
geneous climate in a temperature zone. The fan operates automatically to regulate
the humidity and temperature. The fan can be switched off (Silent Mode) once the
set temperature has been reached.
This is how to switch on the fan (dynamic cooling mode):
➤ Press the button for > 5 seconds.
✓ 5 acoustic signals are emitted.
The fan is switched on (dynamic cooling mode).
This is how to switch off the fan (silent mode):
➤ Press the button for > 5 seconds.
✓ 3 acoustic signals are emitted.
The fan is switched off (silent mode).
_MaCave_A5.book Seite 20 Freitag, 2. Dezember 2016 10:15 10
To Next Page
Loading...
