EasyManua.ls Logo

Dometic D50 - Temperature monitoring; Using the Sabbath mode

Dometic D50
276 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
D15, D50 Using the appliance
19
Temperature monitoring
A warning signal sounds and the temperature display flashes.
if the inner temperature of a zone deviates from the set temperature by more than
C.
if the power supply has been disconnected for a long time.
if the door has not been shut properly.
if the door is open for more than 60 seconds.
This prevents the temperature from falling or rising unnoticed, which could affect the
quality of the wine.
Once the unit has reached the set temperature, the warning signal stops and the
temperature display stops flashing.
To switch off the warning signal prematurely:
Press the button briefly.
The temperature display flashes until the set temperature is reached. The display
is then illuminated constantly and indicates that the alarm system is active again.
Using the Sabbath mode
In this mode, the display, interior lighting and warning signal for the temperature
monitor are deactivated. The refrigeration continues as usual.
To switch on the Sabbath mode:
Press the
and buttons simultaneously for at least 5 seconds.
The temperature display flashes 4 times. The Sabbath mode is activated. The
Sabbath mode switches off automatically after 96 hours.
To switch off the Sabbath mode:
Press the
and buttons simultaneously for at least 5 seconds.
The temperature display flashes 4 times. The Sabbath mode is deactivated. The
display, interior lighting and warning signal for the temperature monitor are
activated.
_MaCave_A5.book Seite 19 Freitag, 2. Dezember 2016 10:15 10

Table of Contents

Related product manuals