- 14 -
RM2410 & RM2510
Install the six screws in the following order:
1. Two screws installed through the front base.
2. Two screws installed in the top frame.
3. Two screws installed in the rear base.
INSTALLATION PROCEDURE
FIG 14 - SECURING RM2410 & RM2510
FIG 15 - SECURING RM2620 & RM2820
Sealing
Strip
3 rd.
2 nd.
1 st.
4 th.
1 st.
2 nd.
3 rd.
RM2620 & RM2820
Install the screws in the following order:
1. Two screws installed through the front base.
2. Two screws installed in the top frame.
3. Two screws installed in the rear base.
4. Attach lower front strip after the refrigerator is set
into the cutout opening.
To Next Page
Loading...
