REFRIGERATOR OVERVIEW
DC mode
RM2354, RM2454, RM2554 & DM2663
mode indicator lamp is illuminated and all other lamps are off.
When there is no charging of the house battery, switch to
LIMP MODE OF OPERATION
In the event of a failure of a major operating component, the
control system will continue to operate the cooling system.
RM2351, RM2451, RM2551, DM2652 & DM2852
If the control can not read the temperature sensor and control
the preset temperature, the control will run the cooling unit
continuously at the energy source available. The refrigerator
new sensor is installed and the system reset.
RM2354, RM2454, RM2554, DM2662, DM2663, DM2862,
DM3862, NDM1062 & NDR1292
module becomes non functional. The control system reverts
to full automatic operation selecting the best energy source
temperature setting is maintained at the mid position. The
power module will continually attempt to reestablish opera-
tion of the display module.
The second limp mode of operation will execute when
a failure of the temperature sensing device or associated
electronic circuitry occurs. If this should happen, the con-
trol system operates on the energy source selected via the
control panel. The cooling unit runs continuously on the se-
lected energy source. The refrigerator continues to operate
and the system is reset.
CLIMATE CONTROL SYSTEM
DM2652, DM2662, DM2663, DM2852, DM2862, DM3862,
NDM1062 & NDR1292
the metal frame between the freezer and fresh food compart-
ments may have water droplets forming. The number of water
droplets will increase if the vehicle is not air conditioned dur-
they form. The climate control can be left on continuously or
Turn it off when a charging source is not available.
LOW AMBIENT CONTROL
DM3862, NDM1062 & NDR1292
The refrigerator is equipped with an exclusive feature that
allows for trouble-free operation in low ambient temperature
-
be turned off.
THERMOSTAT
RM2354, DM266, DM2663, DM2862, DM3862, NDM1062 &
NDR1292
The thermostat controls both the gas and electric operation,
thereby eliminating the necessity of resetting each time a dif-
the thermostat should be adjusted to the desired temperature
setting.
To Next Page
Loading...
