Dometic DSP-EM Service Manual

3
EN
DSP-EM
Quick guide service codes
Service
Code
Short description
Service
Code
Short description
S-00 Setting of the connected devices S-29 Program version number
S-01 Output voltage S-30 Battery charging status switch off
S-02 Output frequency S-31 Charging status advance warning
sensitivity
S-03 Standby mode S-32 Standby timer display
S-04 Standby timer S-33 Display selftest
S-05 Standby delay S-34 Dispay program version number
S-06 Standby threshold S-35 Factory settings
S-07 DC high-voltage shutdown
S-08 Upper DC restart voltage
S-09 DC low-voltage shutdown
S-10 lower DC restart voltage
S-11 Advance warning setting
S-12 Battery type
S-13 Battery capacity
S-14 Battery charging current
S-15 End-of-charge voltage
S-16 Float charge voltage
S-17 Bulk timer
Duration of the I phase
S-18 Absorption timer
Duration of the U0 phase
S-19 Battery cable length
S-20 Cable cross section
S-21 Emergency vehicle charging mode
S-22 Generator mode
S-23 UPS function
S-24 UPS timer
S-25 AC high-voltage shutdown
S-26 Upper AC restart voltage
S-27 AC low voltage shutdown
S-28 lower AC restart voltage
DSP-EM-Service-16s.book Seite 3 Dienstag, 29. Januar 2019 3:08 15

Dometic DSP-EM Specifications

General

Brand	Dometic
Model	DSP-EM
Category	Measuring Instruments
Language	English