To Next PageTo Next PageWhat does E9 mean on my Dometic FJX7333IHP display?
The error code E9 on your Dometic Air Conditioner display indicates a compressor drive or IPM module fault. Contact an authorized service agent or Dometic for assistance.
Why does my Dometic Air Conditioner (FreshJet FJX4233EEH/ FJX4333E(EH)/FJX7333IHP/ FJX7337IHP/FJX7457IHP) constantly switch itself off?
If your Dometic FreshJet Air Conditioner constantly switches itself off, it may be because the icing sensor has tripped. This can occur if the outer temperature is too low or all air nozzles are closed.
Why does my Dometic Air Conditioner constantly switch itself off?
If your Dometic Air Conditioner constantly switches itself off (fixed-speed and inverter models), the icing sensor may have tripped. This can occur if the outer temperature is too low or if all air nozzles are closed.
What to do if my Dometic FJX7333IHP is not switching on?
If your Dometic Air Conditioner is not switching on, it could be due to the following reasons: * There is no power supply connected; check the power supply. * The voltage is too low (less than 200 V). * The voltage converter is defective. * One of the temperature sensors is defective. * The electrical fuse of the power supply is too low. For voltage issues, a defective voltage converter, a faulty temperature sensor, or an insufficient electrical fuse, contact an authorized service agent or Dometic.
What does EA mean on my Dometic Air Conditioner display?
The error code EA on your Dometic Air Conditioner display indicates a current sensor fault. Contact an authorized service agent or Dometic for assistance.
What to do if water enters the vehicle from Dometic Air Conditioner?
If water is entering your vehicle from the Dometic Air Conditioner, the condensation water drainage openings may be clogged. Clean these openings to ensure proper drainage. If the problem continues, the seals may be damaged, and you should contact an authorized service agent or Dometic.
What does P7 mean on my Dometic FJX7333IHP display?
The error code P7 on your Dometic Air Conditioner display indicates an evaporator coil protection issue (heating mode). Contact an authorized service agent or Dometic for assistance.
What does P9 mean on my Dometic FJX7333IHP display?
The error code P9 on your Dometic Air Conditioner display indicates a compressor drive abnormality or that the compressor is not starting. Contact an authorized service agent or Dometic for assistance.
What does P0 mean on my Dometic Air Conditioner display?
The error code P0 on your Dometic Air Conditioner display indicates an over temperature or over current on the IPM module. Contact an authorized service agent or Dometic for assistance.
Why does water enter the vehicle from my Dometic FJX7333IHP Air Conditioner?
Water may enter the vehicle from your Dometic Air Conditioner if: * The condensation water drainage openings are clogged. To resolve this, clean the water drainage openings. * The seals are damaged. If this is the case, contact an authorized service agent or Dometic.
Provides crucial warnings about electrical safety, child supervision, and appliance handling.
Details the specific vehicles and environments the air conditioner is designed for.
Illustrates and describes the buttons and display elements of the remote control.
Describes the available modes like Cooling and Ventilation for the FJX4233M.
Details modes like Automatic, Cooling, Heating, etc., for enhanced models.
Guides users through initial inspection and preparation before operating the unit.
Covers using the remote control and basic operations for advanced models.
Details how to clean the unit, remote, and air distribution box, with safety warnings.
Outlines regular inspection and cleaning of drainage channels and air filters.
Lists common problems related to poor cooling and their suggested remedies.
Addresses issues like not heating well, low air output, water ingress, and unit not switching.
Covers problems where the unit switches on/off unexpectedly or fails to operate.
Explains error codes (P1, P2, P4, E0, E1, etc.) and their corresponding troubleshooting steps.
Provides crucial warnings about electrical safety, child supervision, and appliance handling.
Details the specific vehicles and environments the air conditioner is designed for.
Illustrates and describes the buttons and display elements of the remote control.
Describes the available modes like Cooling and Ventilation for the FJX4233M.
Details modes like Automatic, Cooling, Heating, etc., for enhanced models.
Guides users through initial inspection and preparation before operating the unit.
Covers using the remote control and basic operations for advanced models.
Details how to clean the unit, remote, and air distribution box, with safety warnings.
Outlines regular inspection and cleaning of drainage channels and air filters.
Lists common problems related to poor cooling and their suggested remedies.
Addresses issues like not heating well, low air output, water ingress, and unit not switching.
Covers problems where the unit switches on/off unexpectedly or fails to operate.
Explains error codes (P1, P2, P4, E0, E1, etc.) and their corresponding troubleshooting steps.
General| Brand | Dometic |
|---|---|
| Model | FJX7333IHP |
| Category | Air Conditioner |
| Language | English |
