EN Dometic FJX
NOTICE! Damage hazard
• The appliance functions optimally at 1020mbar.
• The appliance shall be stored so as to prevent mechanical damage from occurring.
• Before installation, check whether any vehicle components could be damaged by the installation of
the appliance (such as lamps, cupboards, doors). The vehicle manufacturer may have already pro-
vided points where the opening for the installation of the appliance can be made without any risk of
weakening the construction or cutting power cables.
• Before installation, consult the vehicle manufacturer whether the construction is designed for the stat-
ic weight and the loads of the roof air conditioner when the vehicle is in motion.
• Seal of all openings made when installing the roof air conditioner.
• Select a flat and sufficiently level area at the center of the vehicle roof between two longitudinal sec-
tions for installation.
• The roof inclination of the installation surface may not exceed 10°.
• Ensure that there are no objects within the vehicle which could obstruct the attachment of the air dis-
tribution box or the cooled air from flowing through the swivelling air distribution nozzles.
• Do not make any alterations or conversions to the appliance.
• Never drive through automatic car washes when the appliance is mounted.
• If faults occur in the refrigerant circuit, the system must be checked by a specialist company and re-
paired properly.
• The refrigerant must not be released into the air.
• Ask the vehicle manufacturer if the height entered in your vehicle documents needs to be altered due
to the installation of the roof air conditioner.
5 Scope of delivery
No. in fig.1, fig.2
Quantity Description
1 1 Roof top unit
2 1 Roof frame
3 1 Air distribution box (ADB)
4 1 ADB center cover
5 4 Duct sections
6 3 Cable connectors
7 4 Fastening bolts
8 1 Box cover
9 1 Only FreshJet FJX4233EEH/FJX4333E(EH)/FJX7333IHP/
FJX7337IHP/FJX7457IHP: Remote control
14
To Next Page
Loading...
Need help?
General
