Need help?Do you have a question about the Dometic OPTIMUS EPS Series and is the answer not in the manual?
General| Brand | Dometic |
|---|---|
| Model | OPTIMUS EPS Series |
| Category | Utility Vehicle |
| Language | English |
Provides guidelines for safe operation of the EPS system before, during, and after use.
Outlines safety precautions for technicians installing the EPS system.
Steps to take before operating the boat for the first time.
Procedure for performing a pre-operation system inspection.
Steps to verify no interference between steering system components.
Information on interfacing and operating with autopilot systems.
Basic principles and handle motion of the Optimus 360 joystick.
Procedure for switching from joystick back to conventional steering.
Categorizes system faults into Danger, Warning, and Caution.
Describes how the system alerts the operator to faults.
Procedures for dealing with critical system faults.
Instructions for operating the vessel safely in a fault condition.
Steps for manually repositioning the steering actuator.
Guidance for responding to non-critical system warnings.
Actions to take if the CANtrak display becomes inoperative.
Details on selecting and physically installing the electric actuator.
Step-by-step guide for mounting the electric actuator.
Information on different helm styles and their mounting.
Detailed steps for making 12V power connections to actuators.
Steps to configure the system type, devices, and locations.
Tasks for configuring the steering system parameters.
Procedure to teach the SCU actuator end-of-travel points.
Performing final checks for interference after setup.
Guide to identifying and resolving common system faults.
To Next Page
