CAM360 Explanation of symbols
7
1 Explanation of symbols
!
A
I
2 Safety instructions
Please observe the safety instructions and stipulations issued by the
vehicle manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
• Faulty assembly or connection
• Damage to the product resulting from mechanical influences and excess voltage
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in the operating manual
The cameras are waterproof. However, the seals on the cameras cannot withstand a
high-pressure cleaner (fig. 1, page 3). Therefore, you should observe the following
instructions when handling the cameras:
A
NOTICE!
• Do not open the cameras, as this impairs the leak tightness and the
function of the cameras (fig. 2, page 3).
• Do not pull at the cables, as this impairs the tightness and the function
of the cameras (fig. 3, page 3).
• The cameras are not suitable for use under water (fig. 4, page 3)!
WARNING!
Safety instruction: Failure to observe this instruction can cause fatal or
serious injury.
NOTICE!
Failure to observe this instruction can cause material damage and impair
the function of the product.
NOTE
Supplementary information for operating the product.
CAM360-O-DE.book Seite 7 Montag, 24. April 2017 12:53 12
To Next Page