Dometic PLB40 Instruction Manual

EN
Maintaining and cleaning the product PLB40
14
8 Maintaining and cleaning the product
A
➤ Occasionally clean the product with a damp cloth.
A
9Warranty
The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and warranty processing, please include the following documents when
you send in the device:

A copy of the receipt with purchasing date

A reason for the claim or description of the fault
The display shows the warn-
ing symbol. The discharge
arrow and either the USB or
2-pin or DC symbol flashes.
An error sound is beeping for
60 seconds.
Over current protection was
triggered.
Turn the device off. Release
some of the load before
switching the device on
again.
Short circuit protection was
triggered.
Turn the device off. Clear the
short circuit before switching
the device on again.
The battery symbol is flash-
ing. An error sound beeps
every 3 seconds for 10 times.
After the beeps the device
switches off automatically.
The battery capacity is 0%. Charge the device.
NOTICE!

Do not use sharp or hard objects or cleaning agents for cleaning as
these may damage the product.

Do not use alcohol based cleaning materials for cleaning the gloss
top cover.
NOTICE!
Fully charge the lithium iron phosphate battery at least every six months.
Overloading the battery or storing it for too long without charging it may
cause permanent damage to the battery.
Problem Cause Remedy
3/%2VERRN6HLWH0RQWDJ1RYHPEHU

Dometic PLB40 Specifications

General

Battery Type	Lithium Iron Phosphate (LiFePO4)
Capacity	40 Ah
Voltage	12.8 V
Charging Options	AC, DC, Solar
Warranty	2 years
Operating Temperature	-20°C to +60°C
Cycle Life	2000 cycles at 80% Depth of Discharge
Protection	Overcharge, Over-discharge, Short-circuit
USB Ports	2 (5V/2.4A each)