PLB40 General safety instructions
7
A
NOTICE!
Do not insert foreign objects into the output or input terminals.
Do not attempt to replace the internal battery cells.
Before using for the first time, charge your battery pack using one of
the methods described in chapter “Charging the lithium iron phos-
phate battery pack” on page 11.
Before using the device for the first time, check that the voltage speci-
fication on the rating plate matches that of the power supply.
Never pull on the power cord to unplug the device from the power
socket.
Store the device in a dry and cool place.
2.2 Operating the device safely
!
WARNING!
Only use the charger supplied to charge the device.
The power socket to which the device is connected must be close by
and easily accessible.
!
CAUTION!
Do not operate the device
– In the vicinity of corrosive fumes
– In the vicinity of combustible materials
– In areas where there is a danger of explosions
A
NOTICE!
Do not disconnect any cables when the device is still in use.
Only use the device in upright position.
3/%2VERRN6HLWH0RQWDJ1RYHPEHU
To Next Page
Loading...
Need help?
General
