PLB40 General safety instructions
3
A
I
2 General safety instructions
The manufacturer accepts no liability for damage in the following cases:
• Damage to the product resulting from mechanical influences and incorrect
connection voltage
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in the operating manual
The declaration of conformity can be requested from the manufacturer (contact infor-
mation on the back).
Note the following basic safety information when using electrical devices to protect
against:
• Electric shock
•Fire hazards
•Injury
2.1 General safety
!
WARNING! INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELEC-
TRIC SHOCK, OR INJURY TO PERSONS.
• Only use the device as intended.
• Disconnect the device from the mains
– Before cleaning and maintenance
–After use
– Before changing a fuse
• To reduce risk of damage to the electric plug and cord, pull the plug
rather than the cord when disconnecting the device.
• Do not use a device that is damaged or modified. Damaged or modi-
fied devices may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
• Do not operate the device with a damaged cord or plug, or a dam-
aged output cable.
NOTICE!
Indicates a situation that, if not avoided, can result in property damage.
NOTE
Supplementary information for operating the product.
DometicPLB40_OPM_4445102605_APAC(en)_20xx-xx-xx.book Seite 3 Mittwoch, 2. Dezember 2020 9:02 09
To Next Page
Loading...
