Dometic Power Awning Pro 3316554 Series User Manual

Power Awning Pro
3316554.XXX, 3316518.XXX, 3316519.XXX, 3316520.XXX
Read these instructions carefully. These instructions MUST stay with this product.
Dometic Corporation reserves the right to modify product appearances and specications without notice.
USA
SERVICE OFFICE
Dometic Corporation
1120 North Main Street
Elkhart, IN 46514
CANADA
Dometic Corporation
46 Zatonski, Unit 3
Brantford, ON N3T 5L8
CANADA
SERVICE CENTER &
DEALER LOCATIONS
Visit:
www.eDometic.com
REVISION A
Form No. 3316690.000 03/17
(French 3316691.000_A)
©2017 Dometic Corporation
LaGrange, IN 46761
INTRODUCTION ..................................................................... 2
IMPORTANT SAFETY INSTRUCTIONS AND DOCUMENT SYMBOLS ..........................2
A. Recognize Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
B. Understand Signal Words ......................................................... 2
C. Supplemental Directives .......................................................... 2
D. General Safety Messages ........................................................2
GENERAL INFORMATION .............................................................3
A. Receiver Control Range ..........................................................3
INSTALLATION ......................................................................3
A. Installing The Receiver ...........................................................3
B. Programming The Remote Control .................................................. 4
C. Programming The Vibration Sensor (If Applicable) ......................................5
D. Mounting The Vibration Sensor (If Applicable) .........................................6
OPERATION ........................................................................ 7
A. The Function Of The Remote Control ................................................7
B. Adjusting The Vibration Sensor (If Applicable) .........................................7
C. Other Useful Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
INSTALLATION & OPERATING
INSTRUCTIONS

Dometic Power Awning Pro 3316554 Series Specifications

General

Brand	Dometic
Model	Power Awning Pro 3316554 Series
Category	Accessories
Language	English

Summary

Introduction to Power Awning Pro

Product Overview and Intended Use

The Power Awning Pro system is designed for installation in Recreational Vehicles.

Manual Purpose and Safety Emphasis

This manual provides safety instructions to help reduce the risk of accidents and injuries.

Important Safety Instructions and Symbols

Recognizing Safety Information

Explanation of the safety alert symbol used to warn of potential physical injury hazards.

Understanding Signal Words

Definitions of signal words (Warning, Caution, Notice) and their associated hazard levels.

Supplemental Directives and Compliance

Instructions to follow safety information and comply with local/national installation codes.

General Safety Messages

Crucial warnings regarding qualified installation, product modification, and environmental hazards.

General Information

Required Hardware and Components

Lists basic and optional components, as well as required hardware for the system.

Receiver Control Range

Details the operational range of the receiver in the air and with concrete walls.

Installation Procedures

Electrical Safety During Installation

Warnings and notices regarding electrical shock hazards and power disconnection.

Installing the Receiver

Steps for determining the receiver location and routing the necessary wiring.

Programming the Remote Control

Step-by-step guide to program the remote control to the wireless receiver.

Programming the Vibration Sensor

Instructions for pairing and programming the vibration sensor with the receiver.

Mounting the Vibration Sensor

Procedure for securely mounting the vibration sensor to the awning's front channel.

Operation and Adjustments

Function of the Remote Control

Describes the functions of the Up, Down, and LED buttons on the remote control.

Adjusting the Vibration Sensor Sensitivity

Guide to adjusting the vibration sensor's sensitivity level for optimal performance.

Other Useful Information

Provides details on sensor functionality checks and awning extension behavior.