Door locking
10
1. Loosen the front
and back securing
brackets.
2. Move the storage rack to the left and
remove it.
Dismantling:
2.
1.
To fit the storage rack, the reverse order applies.
1. Set energy selector switch (A) to
position "0" (OFF). The appliance is
now fully switched off.
2. Secure the door open by
means of the door stop.
The door will be slightly
ajar; this is to prevent
mould from forming inside
the appliance.
A
Switching off gas operation
If the refrigerator is to be taken out of service for an
extended period of time, the on-board shut-off valve
and the cylinder valve must be closed.
park position
close open
park position
close
open
5.6
5.7
5.8
Fig. above RM 6xxx
Fig. below RM 7xx1
Switching off
Positioning the storage rack
To Next Page
Loading...
