11
Disposal
In order to ensure that the recyclable packaging materials are re-used, these should
be sent to the usual local collection system.
The appliance should be transferred to a suitable waste disposal company that will
ensure re-use of the recyclable components and proper disposal of the rest.
For eco-friendly draining of the coolant from all absorber refrigeration units, a suitable
disposal plant should be used
Energy-saving tips
At an average ambient temperature of approx. 25°C, it is sufficient to operate the
refrigerator at the middle thermostat setting (for both gas and mains voltage).
Where possible, always store goods that have previously been cooled.
Do not position the refrigerator in direct sunlight.
Constant circulation of air must be supplied to the refrigerator unit.
Defrost regularly.
Open the door only for a short time when removing goods from the refrigerator.
Run the refrigerator for about 12 hours before filling it.
Technical Data
Declaration of conformity
5.12
5.14
5.15
RM 2191 548x491x545 48 lit. ---- 125W / 115W approx. 2,5KWh / 270g 18 kg X
RM 2193 548x491x545 48 lit. ---- 125W / 115W approx. 2,5KWh / 270g 18 kg X
Model Dimensions Groos capacity Usable Connection * Consumption Netweight Ignition Ignition Stepped-
H x W x D (mm) incl. freezer capacity of Mains / Battery electricity / gas Piezo Reigniter cabinet
depth incl. door compartment freezer in 24 hrs
compartment
We reserve the right to make technical changes.
*Average consumption measured at an average ambient temperature of 25°C in pursuance of ISO Standard.
5.16
To Next Page
Loading...
Need help?
General
