To Next PageTo Next Page
Need help?Do you have a question about the Dometic RM24A and is the answer not in the manual?
General| Brand | Dometic |
|---|---|
| Model | RM24A |
| Category | Refrigerator |
| Language | English |
Details specific features for the RM24 model, including casing and door.
Covers common equipment like flame failure devices and cabinet insulation.
Overview of installation requirements, certifications, and safety codes.
Covers air circulation needs, gas supply hook-up, and electrical power connections.
Provides installation tips and lists recommended ventilation kit options.
Provides cabinet and required recess sizes in inches and millimeters.
Covers electrical grounding, proper fusing, and gas line installation safety.
Instructions for safely discarding old units, including door removal.
Lists dimensions for different panels and explains the replacement process.
Step-by-step guide to replace the door gasket on the RM24 model.
Instructions for replacing door gaskets on RM36C and other models.
Steps to replace the evaporator door and gasket on the RM36C model.
Instructions for replacing evaporator doors on specific models.
Steps for replacing evaporator door gaskets on specific models.
Steps to reverse the door hinging from right to left-hand on RM24.
Instructions for reversing door hinging on RM36C, RM46, RM47, RM66, RM67.
Instructions for reversing door hinging on RM76 and RM77 models.
Describes the sealed system's components and refrigerant, and illustrates cooling units.
Discusses factors affecting performance and issues like blockages and weak mixtures.
Information on the filling valve and ammonia leak detection.
Detailed steps for removing the cooling unit on RM24 models.
Steps to remove the refrigerator from its recess and its cooling unit.
Detailed procedure for removing the absorption unit from RM76 and RM77 models.
Lists and identifies all gas equipment parts for the RM24 model.
Lists and identifies electrical components for RM24 operation.
Lists components for gas and electric operation for various models.
Lists components specifically for 12V operation.
Describes thermostat parts and procedures for cleaning its valve and seat.
How to identify and address a loss of charge in the thermostat.
Details burner construction, jet sizes, and corresponding heat input.
Lists flue parts and the importance of correct baffle placement.
Procedure for cleaning flue blockages to ensure proper draft.
Lists parts and describes how the safety device functions to prevent gas leaks.
Procedures for replacing the thermo-element and safety valve magnet.
Steps to replace the electric heater, including disconnections and reassembly.
Lists correct heaters for each model, including voltage, amps, and watts.
Shows the electrical connections for RM24 models operating on 12V/110V.
Shows connections for RM36C-RM77 on 110V and 12V/110V.
How to check gas pressure using a water U gauge or low pressure gauge.
Notes that correct installation and adjustments are key for performance.
Identifies control locations and explains the gas/electric interlock function.
Step-by-step guide to starting the refrigerator on gas.
Explains operation on 12V DC or 110V AC power sources.
General instructions for starting these models on gas or electric.
Steps for starting the refrigerator on gas for these models.
Steps for operating the refrigerator on electric power.
Explains why leveling is crucial for cooling and how to check it.
How settings affect refrigeration and guidance on adjusting the control.
Explains correct insertion for proper burner operation and temperature control.
Tips for air circulation, covering food, and avoiding odors.
Steps for cleaning the inside of the refrigerator, including shelves and gaskets.
Advice on water temperature for faster ice freezing.
Describes the purpose of the travel latch for securing the door during transit.
How to turn off the unit when refrigeration is not required for extended periods.
Importance of a good seal and how to check and correct sealing issues.
Identifies improper food storage and infrequent cleaning as odor sources.
Causes related to gas leaks, burner flame issues, or flue problems.
Solutions for the flame extinguishing in windy conditions or persistence.
How to replace the flint in the RM24 model's lighter.
Procedure for replacing the worn serrated wheel on the RM24 lighter.
Describes the piezo crystal lighting device and its function.
Steps to replace the electrode or the complete lighter unit.
Addresses unsatisfactory cooling and refrigerator being too cold.
Addresses unsatisfactory cooling and refrigerator being too cold on gas.
Lists potential causes for a failed refrigerating unit, including leveling and ventilation.
Guidance on returning faulty units safely to prevent transit damage.
Table linking symptoms to causes for electric operation.
Table linking symptoms to causes for gas operation.
Steps for regular cleaning and adjustment of the burner assembly.
