To Next PageTo Next Page
Need help?Do you have a question about the Dometic RM2453 and is the answer not in the manual?
General| Brand | Dometic |
|---|---|
| Model | RM2453 |
| Category | Refrigerator |
| Language | English |
Check the data plate for model suitability and gas/electrical supply specifications.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not avoided may result in property damage.
Identifies the main controls: ON/OFF, Fuel selector, Thermostat, Piezo igniter, Flame indicator.
Explains how the ammonia-based cooling system works and the importance of levelling.
Provides tips on defrosting, cleaning, packaging, and professional servicing.
Details the need for specific fresh air intake and exhaust vents for proper operation and safety.
Specifies minimum distances to combustible materials for safe installation.
Instructions on removing packaging and ensuring no obstructions for the cooling unit.
Provides overall and recess dimensions for fitting the refrigerator into an enclosure.
Guidelines for level installation, floor protection, enclosure sealing, and securing the unit.
Details the process of securing the refrigerator using six screws for stability and safety.
Covers gas installation, pressure requirements, and leak testing procedures.
Explains 230-240V AC connection, grounding, and cord routing requirements.
Procedure for replacing a damaged supply cord to prevent hazards.
Details 12V DC connection, wire gauge, fuse, polarity, and relay requirements.
Information on reversing the door swing using a special kit.
Step-by-step instructions for attaching the door panel using screws.
Step-by-step instructions for attaching the door panel using a snap-in method.
Procedure for safely disconnecting and removing the refrigerator.
Instructions for starting and operating the refrigerator on LP gas or 230-240V AC.
Explains how to adjust the thermostat for desired cabinet temperature in gas/AC modes.
Procedure for shutting down the refrigerator and preparing for storage.
Guidance on storing food in different compartments for optimal preservation.
Steps for defrosting the refrigerator and handling defrost water.
Instructions for cleaning the interior, exterior, and rear area of the refrigerator.
Procedure for replacing the 230-240V AC or 12V DC electric heater.
Covers checking LP gas connections, pressure, and gas equipment assembly.
Detailed steps for cleaning the flue, burner, and related components.
Lists common causes for lack of cooling, such as burner issues, venting, or thermostat settings.
Identifies potential causes for fume odours, including burner or flue problems.
