Dometic RM2454 - Overall and Recess Dimensions

5
VENTILATION HEIGHTS
Refer to FIG. 3 page 4.
CLEARANCES
Minimum clearances in inches to combustible materials
are:
G: Top 0
K: Side 0
L: Bottom 0
M: Rear 0
N: See NOTE: Clearance “N” below.
NOTE: Clearance “M” is between the rearmost part of
the refrigerator and the wall behind the refrigerator.
NOTE: Clearance “N” is the distance between the bot-
tom of the lower side vent to the roof material. For ven-
tilation height, see table VENTILATION HEIGHTS.
See Figures 3 and 4.
This method of installation and these clearances will give you adequate space for service and proper installation.
G
Overall Recess
Refrigerator Dimensions Dimensions
Model
Height Width Depth Height Width Depth
ABCHWD
inch 37-3/8 24-7/8 24-11/16 36-9/16 23-11/16 24
RM 2454
mm 948 632 627 928 602 610
Installation with roof Minimum ventilation
vent and lower side vent heights in:
Refrigerator Inches mm
RM 2454 37-3/4 960
K
NOTE: Wood Strip
MUST be in place
FIG. 4
N
M
L
K
Side view View from above
FIG. 5
D
HW
D
C
B
A