Do you have a question about the Dometic RM760 and is the answer not in the manual?
Input Voltage (AC) | 230 V |
---|---|
Freezer Compartment | Yes |
Adjustable Thermostat | Yes |
Type | Absorption |
Total Volume | 90 liters |
Capacity | 90 liters |
Input Voltage (DC) | 12 V |
Gas Pressure (DIN900) | 30 mbar |
Energy Source | 12V DC, 230V AC, Gas |
General installation guidelines for Dometic refrigerators in the USA and Canada.
Instructions for connecting the refrigerator to 115V AC and optional 12V DC power sources.
Details on connecting the gas supply line, including pressure regulator requirements.
Tips for proper refrigerator installation, leveling, and sealing within an enclosure.
Requirements for certified installations, including ventilation.
Explanation of installation methods with reference to diagrams.
Table specifying minimum ventilation heights for different models.
Detailed steps for installing the refrigerator within a vehicle.
Instructions on how to ensure the refrigerator is level for optimal performance.
Step-by-step guide to starting the refrigerator on gas and electric power.
Guidance on food storage within the refrigerator and freezer compartments.
Recommendations for storing frozen foods and ice making.
Instructions on how to make ice cubes and optimize the process.
Procedures for defrosting the refrigerator, both automatic and manual.
Steps to temporarily or permanently shut down the refrigerator.
Guidelines for cleaning the interior and components of the refrigerator.
Recommended periodic maintenance tasks, including burner assembly cleaning.
Step-by-step guide for changing the refrigerator door panel.
Table listing panel dimensions for different refrigerator models.
Description of the sealed system construction and refrigerant charge.
Safety precautions regarding the absorption system and its piping.
Guidance on diagnosing cooling unit issues and external factors.
Information about the unit filling valve and warranty voidance.
List and identification of gas equipment components.
List and identification of electric equipment components.