Installing the refrigerator RMD10
18
Select one of the three versions for draft-proof installation (fig. 7, page 6):
Stop bar behind the fridge (A)
➤ Glue a flexible sealing lip (1) to a stop bar (2) behind the refrigerator (3).
➤ Push the refrigerator combination against the stop bar with the flexible sealing
lips.
✓ The space behind the refrigerator is sealed to the interior of the vehicle.
Side gap distance of up to 5 mm (0.2 in.) between refrigerator and
furniture (B)
➤ Glue the sealing lips (see chapter “Accessories” on page 15) on the side of the
furniture (4).
➤ Push the refrigerator combination against the flexible sealing lips on furniture.
✓ The space behind the refrigerator is sealed to the interior of the vehicle.
Side gap distance of 5 mm to 10 mm (0.39 in.) between refrigerator and
furniture (C)
➤ Glue the double lipped sealing (see chapter “Accessories” on page 15) on the
side of the furniture (4).
➤ Push the refrigerator combination against the double lipped sealing on furniture.
✓ The space behind the refrigerator is sealed to the interior of the vehicle.
RMD10_INM_US.book Seite 18 Dienstag, 10. Dezember 2019 2:09 14
To Next Page
Loading...
