Using the refrigerator RMDX21, RMDX25
24
7.13 Replacing the door panel
A
Removing the door panel from framed door model
Proceed as follows:
➤ Remove the door trim carefully. It is only clipped in and held in place by small
hooks.
➤ Pull the old panel away from the door trim still installed.
➤ Push the old panel upwards as far as the stop.
➤ Pull the old panel out of the door.
NOTICE! Beware of damage
The door panel must not be replaced when the refrigerator is upright.
1.
2.
3.
4.
RMDX21-25--O-AU.book Seite 24 Freitag, 3. Februar 2017 5:10 17
To Next Page
Loading...
Need help?
General
