RMDX21, RMDX25 Maintenance
33
➤ Clean the burner pipe of coarse impurities using a suitable cleaning brush with
soft bristles (fig. k).
➤ Blow out the burner pipe with compressed air through the slots in the burner
pipe (fig. l ).
➤ Attach the burner cover.
✓ The burner cover is fixed in place when it audibly clicks into place.
➤ Screw the burner cover in place.
➤ Insert the condensation container.
➤ Attach the ventilation grille.
RMDX21-25--O-AU.book Seite 33 Freitag, 3. Februar 2017 5:10 17
To Next Page
Loading...
Need help?
General
