RMDX21, RMDX25 Safety instructions
19
2Safety instructions
The manufacturer accepts no liability for damage in the following cases:
z Faulty assembly or connection
z Damage to the product resulting from mechanical influences and excess
voltage
z Alterations to the product without express permission from the manu-
facturer
z Use for purposes other than those described in the operating manual
!
WARNING!
z Never open the absorber unit. It is under high pressure and can
cause injury if it is opened.
z Ensure clean and residue-free handling if silicon sealant or
similar is used. There is a risk of fire if silicone filaments come
into contact with hot parts or naked flames.
z Do not operate the refrigerator if it is visibly damaged.
z If the AC power cable for this refrigerator is damaged, it must be
replaced by the manufacturer, customer service or a similarly
qualified person in order to prevent safety hazards.
z Never use a naked flame to check the refrigerator for leaks.
z This refrigerator may only be repaired by qualified personnel.
Inadequate repairs may cause serious hazards.
z Only use universal LPG gas.
z Only operate the refrigerator at the pressure shown on the
type plate. Only use pressure controllers with a fixed setting
which comply with national regulations.
z Dismantle all refrigerator doors for the disposal of the old
refrigerator and leave the shelves in the refrigerator to prevent
accidental enclosure and suffocation.
!
CAUTION!
z Danger of crushing! Do not put your fingers into the hinge.
z Before starting the device, ensure that the power supply line
and the plug are dry.
To Next Page
Loading...
Need help?
General
