Accessories Rollerblind Powered
6
4Accessories
Available as accessories (not included in the scope of delivery):
5 Intended use
The Rollerblind Powered is suitable for installation in yachts, boats, motor homes,
caravans or homes. The design and size of the blind are custom-made. The fabric of
the blinds is cut to the customer‘s specifications.
The blinds are designed for interior use only and should not be installed in bath-
rooms, wet rooms or other location with a high level of humidity.
I
6 Technical description
Blinds are available in three mounting types in different sizes:
• BR: Bracket mounted (available in sizes BR38, BR46 and BR55)
• MP: Mounting profile mounted (available in size MP38)
• CA: Cassette mounted (available in sizes C1, C2 and C3)
3 2 Bracket caps (except C3)
4 2 Screw covers (BR only)
5 2 Guide wire kit (GW only)
6 2 Side tracks (ST only)
Description Ref. no.
AP Remote control, 9 channels 9110004562
AP Receiver 9110005414
NOTE
The motors have a built-in, self resetting thermal cut-out for safety
reasons. Prolonged use or over loading the blind could trigger the
cut-out. If this happens allow the motor to cool for a few minutes.
Item in
fig. 1
Quantity Description
RollerblindPowered_IOM_EMEA16.book Seite 6 Donnerstag, 21. November 2019 9:37 09
To Next Page
Loading...
Need help?
General
