RUA5208X, RUA6408X, RUA8408X Installing the refrigerator
13
•
Install the refrigerator so that it is protected from excessive heat, as this leads to
poor performance and increases the power consumption of the refrigerator.
•
The electrical installation must comply with national and local regulations.
•
The gas installation must comply with national and local regulations.
– AS/NZS 5601.2 – Gas installations – LP Gas installations in caravans and boats
– AS/NZS 5601.1 – Gas Installations – General Installations
•
The refrigerator must be installed in a draught-proof location, see chapter “Install-
ing the refrigerator in a sealed location separate to the living space” on page 13.
6.2 Installing the refrigerator in a sealed location
separate to the living space
Gas-powered refrigerators in caravans or motorhomes must be installed in a sealed
location. This means that the combustion air can not be extracted from the interior
and exhaust fumes are prevented from directly entering the living space.
A suitable seal must be provided and fitted between the rear wall of the refrigerator
cabinet and the interior of the vehicle. The purpose is to provide a seal between the
interior of the vehicle and the cooling unit and ventilation area behind the
refrigerator.
!
The manufacturer has applied a sealing strip to the rear surface of the front frame.
WARNING! Fire hazard!
Do not use flammable materials such as silicone sealants, foam or similar
for the draught-proof installation.
RUA8408X-I-AU.book Seite 13 Montag, 3. Juni 2019 2:40 14