Dometic RUA5208X - Page 30

EN
Using the refrigerator RUA5208X, RUA6408X, RUA8408X
30
➤ Remove the three screws from the lower hinge (2. in fig. i) and discard the old
hinge.
➤ Remove the cover from the lower hinge point (1. in fig. j).
➤ Install the cover on the opposite side (2. in fig. j).
➤ Fix the new lower hinge (not included, see chapter “Accessories” on page 7) to
the new position with the three screws (3. in fig. i).
➤ Rotate the locking catch on the latch side by 180 degrees (1. in fig. k) to expose
the fixing screw (fig. k 1).
➤ Remove the locking catch screw (fig. k 1).
➤ Take off the locking catch and top cover (2. in fig. k).
➤ Remove the cover and bush on the hinge side with a small screwdriver (3. in
fig. k).
1.
2.
j
1
2
1.
2.
3.
k
DometicRUA5208X6408X8408X_OPM_4445102445_APAC(en)_xxxx-xx-xx.book Page 30 Friday, March 4, 2022 1:56 PM