RUC5(x)08X, RUC6(x)08X, RUC8(x)08X Technical description
13
Settings menu
Standby mode and error screen
After 10 seconds without operating the control knob, the backlight dims and the display returns to the main menu
(A). If activated, the child lock is active (see chapter “Setting the child lock” on page 29).
After 3 minutes without operating the control knob, the display switches to standby mode (C). A snowflake
appears in the upper left corner to indicate that the refrigerator is on, even if the display is in standby mode.
I
Button Description
Child lock
Beep off
CI-Bus (not applicable)
NOTE
If there is an active error display, the display remains active without switching to standby mode. The
display changes to the error screen (B). In the error screen, the middle section is highlighted in red
and shows the corresponding error code (see chapter “Troubleshooting” on page 39).
To Next Page
