Dometic S7 - Fastening and Hardware Specifications; Screw and Clamp Requirements

Attention: The plastic clamps and the screw guide inside the aluminium-profile are constructed in such a
way that only flat head screws d= 3.9mm can be used for screwing. The type of clamps (Photo 6) and the
length of the screws depend on the wall thickness (see table).
S7-Window
Wall thickness Type of clamps Type and length
of screws
Colour
24-25 mm M 1110 lense head screw
15/16"-1" 3.5 x 13 mm
high-grade steel
26-27 mm M 1134 lense head screw
1 1/32"-1 1/16" 3.5 x 13 mm
high-grade steel
28-29 mm M 1135 lense head screw
1 1/8"-1 3/32" 3.5 x 13 mm
high-grade steel
30-31 mm M 1136 lense head screw
1 3/16-1 7/32" 3.5 x 13 mm
high-grade steel
32-33 mm M 1137 lense head screw
1 1/4"-1 9/32" 3.5 x 13 mm
high-grade steel
34-35 mm M 1142 lense head screw
1 5/16"-1 3/8" 3.5 x 13 mm
high-grade steel
36-37 mm M 1143 lens head screw
1 7/16"-1 15/32" 3.5 x 16 mm
high-grade steel
38-39 mm M 1144 lens head screw
1 1/2"-1 17/32" 3.5 x 16 mm
high-grade steel
40-41 mm M 1145 lens head screw
1 9/16"-1 5/8" 3.5 x 19 mm
high-grade steel
42 mm M 1146 lens head screw
1 11/32" 3.5 x 19 mm
high-grade steel
S7Z-Window
Wall thickness Type of clamps Type and length
of screws
Colour
28-29 mm M 1139 counter sunk screw
1 1/8"-1 3/32" 3.5 x 13 mm
high-grade steel
30-31 mm M 1110 counter sunk screw
1 3/16-1 7/32" 3.5 x 13 mm
high-grade steel
32-33 mm M 1134 counter sunk screw
1 1/4"-1 9/32" 3.5 x 13 mm
high-grade steel
34-35 mm SP 8006 lense head screw
1 5/16"-1 3/8" 3.5 x 13 mm
black
36-37 mm SP 8007 lens head screw
1 7/16"-1 15/32" 3.5 x 16 mm
black
38-39 mm SP 8007 lens head screw
1 1/2"-1 17/32" 3.5 x 16 mm
black
40 mm SP 8008 lens head screw
1 9/16" 3.5 x 19 mm
black
The amount of clamps used depends on the window size (see table). We recommend to install the
Photo 6
4