OPERATION
FIRMWARE VERSION
Example screen shot taken from firmware 2.12.
ed.
of this information before using the printer.
provide
of possible updates to the printer software.
If the supplier has not automatically provided information about possible updates, it is
recommended that the user contact the supplier for updates to the printer software at
regular intervals.
To check the actual firmware version on your controller, press the System menu (see
page 73)) followed by “Version”.
This will display the software version to which the V200 has been configur
We recommend that the user make a note
If the user should require assistance from the supplier, they will be asked to
some of the information contained in this menu. Moreover, the user should be aware
27864 Issue 1January 2008 (75)
To Next Page
Loading...
Need help?
General
