Need help?Do you have a question about the Domino Gx-Series and is the answer not in the manual?
General| Flash Memory | 4 GB |
|---|---|
| RAM | 512 MB |
| Operating Voltage | 24 VDC |
| Digital I/O Pins | 16 |
| Operating system | Linux |
| Connectivity | Ethernet, USB |
| Communication Interfaces | RS-232, RS-485, CAN |
Details compliance with FCC Rules for digital devices and radio frequency energy.
Addresses potential interference with radio and television broadcasts in residential areas.
Information about open source software components and applicable licenses.
Provides a basic introduction to the Domino Gx-Series, user interface, and software.
Details the Gx-IC7, Gx-IC10, and Gx-OEM controllers and their features.
Describes the standard and multi print heads, cable lengths, and group configurations.
Lists technical specifications for controllers, print heads, and cable lengths.
Details the electrical supply requirements and power consumption for controllers.
Instructions for removing controller, print heads, and accessories from packaging.
Guidance on positioning the controller and print heads for optimal operation.
Step-by-step instructions for mounting the Gx-IC7 and Gx-IC10 controllers.
Safety warnings and instructions for connecting the controller to a power supply.
Details on connecting cables to the controller's ports for Gx-IC7, Gx-IC10, and Gx-OEM.
Diagrams illustrating connector pin assignments for different controller types.
Procedures for print head socket relocation, combining, mounting, and orientation.
Instructions and safety precautions for installing ink cartridges into the print head.
Steps to configure and calibrate external shaft encoders for production line measurement.
Configuration for triggering prints using internal signals or external sensors.
Details on assigning functions to controller inputs and outputs.
Setup for cyclic and intelligent micro purging to prevent nozzle blockage.
Instructions for Ethernet, Wi-Fi, and PC connection configurations.
Setup for printing codes from a CSV file for promotional purposes.
Configuration options for user interface language and keyboard layout.
Manual or NTP server synchronization for setting controller date and time.
Sets default label settings for use within the label creator.
Enables, disables, or customizes printer alerts for various conditions.
View and set print head general settings like ink level and alignment.
Procedure for powering on the printer and preparing for operation.
Overview and explanation of the QuickStep user interface elements.
Details the interface for label creation and editing, including views and menus.
Accessing and understanding screens for connections, consumables, and status.
Enabling security to prevent unauthorized changes to printer settings.
Enables controller access via an external server for user authentication.
Adds advanced security features like user management and password policies.
Enabling and exporting the audit log for tracking label changes.
Managing labels, including importing, exporting, and selecting existing labels.
Tools for importing, exporting, organizing, and renaming files on the controller.
Viewing controller and print group statistics for performance monitoring.
Information on printer statuses, alerts, and basic troubleshooting guidance.
Identifies common print quality issues and their corrective actions.
Procedure for safely replacing ink cartridges, including cleaning steps.
Instructions for performing a micro purge to clear blocked ink nozzles.
Steps for manually cleaning ink cartridge nozzles to resolve blockages.
Procedures for backing up, restoring, and upgrading printer software and files.
To Next Page
