PURGE BLOCKED INK CARTRIDGE NOZZLES
WARNING Hazardous Chemicals. Risk of eye and skin damage.
Wear protective equipment such as gloves and glasses when near the
printer.
Contact with chemicals can cause skin or eye damage.
Refer to Safety Data Sheet.
If the ink cartridge nozzles become blocked, a micro purge will
fire the nozzles to remove the
blockage.
To perform a micro purge:
1.
Select Home > Ink settings > Micro purge.
2. Select a Print head tab, to choose which print head to purge.
3. Select Purge.
4. If the micro purge does not clear the blocked nozzle, clean the nozzles, see Clean Ink
Cartridge Nozzles on page 188.
End of procedure.
CLEAN INK CARTRIDGE NOZZLES
WARNING Hazardous Chemicals. Risk of eye and skin damage.
Wear protective equipment such as gloves and glasses when near the
printer.
Contact with chemicals can cause skin or eye damage.
Refer to Safety Data Sheet.
To clean the ink cartridge nozzles:
1. If the print group is active, stop the print group. Select STOP, select the print group and
select Stop.
2.
Open the print head latch and remove the cartridge.
MAINTENANCE & TROUBLESHOOTING
EPT053091 - Issue 5 - 07 May 2021 188