PART 3 OPERATION
START UP
WARNING Hazardous Chemicals. Risk of eye and skin damage.
Wear protective equipment such as gloves and glasses when near the
printer.
Contact with chemicals can cause skin or eye damage.
Refer to Safety Data Sheet.
To start up the printer:
1.
Turn the controller on using the On/O switch.
Note
For Gx-OEM, turn on the power supply to the controller.
Gx-IC7
Gx-IC10
2.
Remove the protective cover from the ink cartridge.
OPERATION
107 EPT053091 - Issue 5 - 07 May 2021
To Next Page
Loading...