Tip : if you use a recipe for the fi rst time, we recommend to use the selection medium.
This button is used to select the size of bread you want to back “small or “larger”.
“Larger” is selected to bake a large bread up to 1350g, “small” is used for baking two
or one small bread of 450g.
Tip : the total amount of ingredients mentioned on the recipe is the weight of your
“start” and “stop” button
With this button the program can be started or stopped.
Tip : when selected the wrong program, you can stop the bread maker by pressing the
“stop” button during a few seconds. Afterwards you can reset the appliance with the
Start : to start the program, press the button once a short biep will be heard. The “:”
between the time will start blinking. The appliance will countdown the time and fi nish
Stop : to end the program, press the button a few seconds until a biep is heard, to
confi rm the program has stopped.
How can you check if the machine is working or the program is runing ?
If the “:” is blinking the program is working.
If the “:” is lighted constantly the program has stopped.
For setting the current time as well as for programming the timer.
For setting the different cycles when using the program “home made”.
For interrupting a program. When pressing the “pause” button the program will be
interrupted but not stopped. The remaining time will start to blink. When pressing the
“pause” button again, the program will fi nish the remaining time.
The “pause” button is also used for setting hours and min. when setting the time.
When plugging in the appliance a “biep” signal isheard and “1 3:10” is shown on
the display. The colon between 3 and 10 won’t blink. This is the standard setting”1”
is stating the selected program., in this case the program 1 “basic”. 3:10 is stating the
working time of the program.
The display also shows an arrow pointing at “larger”, to indicate the size of bread
To Next Page
Loading...
