Domo DO7295S - Before the First Use

30
DO7295S
EN
PARTS
1. Handle
2. On/o button
3. Button for cord roll-up
system
4. Storage position
5. Dust reservoir with handle
6. Button to remove the dust
reservoir
7. Connection for hose
8. Flexible hose
9. Handle for hose with valve
10. Telescopic tube
11. Sliding button for tube
length
12. Floor nozzle
13. Button to extend/retract
brushes
14. ‘Deep clean’ technology
sliding button
15. Furniture nozzle
16. Crevice vacuum cleaner
17. Air outlet with HEPA lter
18. Motor lter
19. Dust reservoir lter
17
18
19
BEFORE THE FIRST USE
Always unplug the appliance from the socket before removing or connecting parts. Make sure that the
dust reservoir is always in the correct position.
FLEXIBLE HOSE
· Assembly: Insert the exible hose connector into the connection opening at the front of the vacuum
cleaner and click into place.
· Disassembly: to disconnect, press the button on the connector to release the exible hose from the
connection opening at the front of the vacuum cleaner.
1
2 3
4
6
5
7
8
9
10
11
12 13
14
15 16