Donaldson Torit Downflo DWST 4-1 User Manual

A5
Donaldson Company, Inc.
DWST 4-2 to 4-4 and 6-2 to 6-4 Multiple Power Module Installation
1. Connect lifting sling or chains to the four lifting eyes located on the roof of the power module.
2. Position the modules side by side. Position the rst power module, remove the lifting eyes before positioning the next power
module, as the lifting slings and chains can interfere.
3. Secure the power modules together using the joining strips, bolt hole plug pack, M8 x 20 mm bolts, and at washers.
4. Lifting eyes can be removed once collector is in place to install more power modules and for mounting accessories on roof.
DWST 4-2 to 4-4 and 6-2 to 6-4 Multiple Power Module Installation
lifting eyes
inlet
joining strips
plug holes both outside edges

Donaldson Torit Downflo DWST 4-1 Specifications

General

Brand	Donaldson Torit
Model	Downflo DWST 4-1
Category	Desktop
Language	English