To Next PageTo Next Page
Need help?Do you have a question about the Donaldson Torit Unimaster UMA-H Series and is the answer not in the manual?
General| Manufacturer | Donaldson Torit |
|---|---|
| Model | UMA-H Series |
| Type | Dust Collector |
| Filter Efficiency | Up to 99.99% |
| Inlet Options | Side, top, or bottom |
| Dust Discharge Options | Drum |
| Construction Material | Stainless steel |
| Application | Industrial dust collection |
Precautions for combustible materials, fire/explosion hazards, and compliance with codes.
Details the Unimaster series, its configurations (UMA-B, H, D), and features like filter area and controller.
Explains the function of separating particulate from airstreams in manufacturing processes and typical applications.
Describes the process of dust-laden air entering, particulate settling, and clean air discharge.
Explains the automatic cleaning sequence, including fan run-down time and shaker motor operation.
Steps for inspecting the unit on arrival, adhering to installation codes, and general installation requirements.
Guidelines for choosing the optimal site and positioning the collector for efficient operation and maintenance access.
Critical safety notes regarding the support of site-installed ducts, piping, and electrical services.
Safety protocols for electrical installation, emphasizing qualified personnel and code adherence.
Guidelines for safe lifting operations, including using approved equipment and qualified personnel.
Step-by-step instructions for installing the UMA-B 40 to 150 models, including foundation and leveling.
Procedures for installing larger UMA models (250-750) and UMA-D, including base and collector section assembly.
Steps for assembling the inlet to the unit, including removing blanks and securing the inlet.
Safety warnings for electrical connections, emphasizing qualified electricians and power lockout.
Explanation of how the UMA controller operates the fan and shaker for filter cleaning.
Information on standard explosion vents, their intended use for outdoor installations, and safety considerations.
Instructions for mounting and connecting the Magnehelic gauge to measure pressure differences.
Guidance on using the gauge to monitor filter change needs and performing basic maintenance.
A pre-operation checklist covering electrical connections, loose items, and component status.
Procedure for shutting down the unit and safety precautions before performing service work.
Checklists for monitoring performance weekly and monthly, including filter pressure and seals.
Steps for safely removing filter inserts and filter assemblies from the collector.
Instructions for inserting new filter bags and filter assemblies correctly into the collector.
Information on the warranty coverage, duration, exclusions, and terms for Donaldson Torit equipment.
How to order genuine replacement parts and obtain service assistance from Donaldson.
